Playing the specific tracks only

You can select:

•Bank on — to play the tracks with the “Play” setting.

•Bank inv (Inverse) — to play the tracks with the “Skip” setting.

1 During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “Bank” appears.

2 Press (4) (n) to repeatedly until the desired setting appears.

z Bank on z Bank inv z Bank off

Playback starts from the track following the current one.

3 Press (SHIFT).

To return to normal playing mode, select “Bank off“ in step 2 above.

Additional

Information

Precautions

•If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it.

•If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse.

•If no sound comes from the speakers of

two-speaker systems, set the fader control to the centre position.

•If your car is equipped with a power aerial, it will extend automatically while the unit is operating.

•Connecting this unit may cause some car battery wear when your car has no ACC (accessory) position on the ignition key switch.

If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer.

Moisture Condensation

On a rainy day or in a very damp area, moisture may condense on the lenses inside the MD player. Should this occur, the unit will not operate properly. In this case, remove the disc and wait for about an hour until the moisture has evaporated.

23