Sony MDX-C5970R Setting the clock automatically, To cancel the CT function, Select “CT off” in step 2 above, 3 Press (SHIFT) to return to the normal display

1 Press (PTY/LIST) during FM reception until “PTY” appears.

The current programme type name appears if the station is transmitting the PTY data. “- - - - -” appears if the received station is not an RDS station, or if the RDS data has not been received.

2 Press (PTY/LIST) repeatedly until the desired programme type appears.

The programme types appear in the order shown in the above table. Note that you cannot select “None” (Not specified) for searching.

3 Push the SEEK/AMS control up or down. The unit starts searching for a station broadcasting the selected programme type. When the unit finds the programme, the programme type appears again for five seconds.

“NO” and the programme type appear alternately for five seconds if the unit cannot find the programme type. It then returns to the previous selected station.

Setting the clock automatically

The CT (Clock Time) data from the RDS transmission sets the clock automatically.

1 During radio reception, press (SHIFT), then press (2) (SET UP) repeatedly until “CT” appears.

2 Press (4) (n) repeatedly until “CT on” appears.

The clock is set.

3 Press (SHIFT) to return to the normal display.To cancel the CT functionSelect “CT off” in step 2 above.

Notes

•The CT function may not work even though an RDS station is being received.

•There might be a difference between the time set by the CT function and the actual time.

15