Each time you press (DSPL), the item changes as follows:
$
Elapsed playback time
$
Disc name*1
$
Track name*2
$
Clock
*1 If there is no prerecorded title for a disc “NO D.Name” will appear on the display.
*2 If a track title is not prerecorded, “NO T.Name” will be displayed.
After you select the desired items, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order.
Tip
The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 18.)
Automatically scrolling a disc name— Auto ScrollIf the disc name or track name on an MD exceeds 10 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows:
•The disc name appears when the disc has changed (if the disc name is selected).
•The track name appears when the track has changed (if the track name is selected).
•The disc or track name appears depending on the setting when you press (SOURCE) to select an MD.
If you press (DSPL) to change the display item, the disc or track name of the MD is scrolled automatically whether you set the function on or off.
1 During playback, press (SHIFT).2 Press (2) (SET UP) repeatedly until “A.Scrl” appears.3 Press (4) (n) to select “A.Scrl on”.4 Press (SHIFT).To cancel Auto Scroll, select “A.Scrl off” in step 3 above.
During playback, push the SEEK/AMS control up or down and release for each
track you want to skip.SEEK/AMS
To locate succeeding tracks
To locate preceding tracks
Locating a specific point in a track—Manual SearchDuring playback, push the SEEK/AMS control up or down and hold. Release the button when you have found the desired
point.SEEK/AMS
To search forward
To search backward
Note
If “
” or “
” appears in the display, you have reached the beginning or the end of the disc and you cannot go any further.
8