Other Functions

You can also control this unit with an optional rotary commander.

Labelling the rotary commander

Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below.

SOUND

LIST

MODE

MODE

LIST

SOUND

By rotating the control (the SEEK/AMS control)

Rotate the control and release it to: •Locate a specific track on a disc. Rotate

and hold the control until you locate the specific point in a track, then release it to start playback.

•Tune in stations automatically. Rotate and hold the control to find a specific station.

By pushing in and rotating the control (the PRESET/DISC control)

Using the rotary commander

The rotary commander works by pressing buttons and/or rotating controls.

You can control an optional CD or MD unit with the rotary commander.

By pressing buttons(the SOURCE and MODE buttons)

(SOURCE)

(MODE)

Push in and rotate the control to: •Receive the stations memorised on the

number buttons. •Change the disc.

Each time you press (SOURCE), the source changes as follows:

Tuner nCD* nMD

Pressing (MODE) changes the operation in the following ways;

•Tuner: FM1 nFM2 nMW nLW

•CD unit*: CD1 nCD2 n…

•MD unit: MD1 nMD2 n…

*If the corresponding optional equipment is not connected, this item will not appear.

16