Sony MDX-F5800 Locating a disc by name, Press, Viewing the Disc Memo, Erasing the Disc Memo, 6 Press (SEL) for 2 seconds, 4 Press (DSPL) for 2 seconds

Viewing the Disc Memo

As a display item, the Disc Memo always takes priority over any original CD TEXT information.

To	Press
View	(DSPL) during CD/CD
	TEXT disc playback

Tip

Other items can be displayed (page 11).

Erasing the Disc Memo1 Press (SOURCE) repeatedly to select “CD.”2 Press (MODE) repeatedly to select theCD unit storing the Disc Memo.3 Press (PTY) (LIST) for 2 seconds.4 Press (DSPL) for 2 seconds.

The stored names will appear.

5 Press the volume +/– button repeatedly to select the disc name you want to erase.

6 Press (SEL) for 2 seconds.

The name is erased.

Repeat steps 5 and 6 if you want to erase other names.

7 Press (PTY) (LIST) for 2 seconds.

The unit returns to normal play mode.

Notes

•When the Disc Memo for a CD TEXT disc is erased, the original CD TEXT information is displayed.

•If you cannot find the Disc Memo you want to erase, try selecting a different CD unit in step 2.

•If you have already erased all of the Disc Memo, the unit returns to normal play mode in step 4.

Locating a disc by name—List-up (For an MD unit, or a CD unit with the CD TEXT/CUSTOM FILE function)

You can use this function for discs that have been assigned custom names*1 or for CD TEXT discs*2.

*1 Locating a disc by its custom name: when you assign a name for an MD or a CD (page 12).

*2 Locating discs by the CD TEXT information: when you play a CD TEXT disc on a CD unit with the CD TEXT function.

1 During playback, press (PTY) (LIST). The name assigned to the current disc appears in the display.

2 Press (PTY) (LIST) repeatedly until you find the desired disc.3 Press (SEEK) (+) or (SEEK) (–) to play the disc.

Notes

•Once a disc name has been displayed for 5 seconds, the display goes back to its normal playback mode.

•If there are no discs in the magazine, “NO DISC” appears in the display.

•If a disc has not been assigned a custom file, “NO NAME” appears in the display.

•If the disc information has not been read by the unit, “NOT READ” appears in the display. To load the disc, first press the number button, then choose the disc that has not been loaded.

•The information appears only in upper case. There are also some letters which cannot be displayed.

13