Changing the sound and display settings

The following items can be set:

REAR/SUB*1 — to switch the audio output REAR or SUB.

Select “REAR” to output to a power amplifier.

Select “SUB” to output to a subwoofer.

CT (Clock Time) (page 19)

A.SCRL (Auto Scroll)*2 (page 11).

M.DSPL (Motion Display) — to turn the motion display on or off.

Select “ON” to activate the motion display (the moving pattern appears in the display).

Select “OFF” to deactivate the motion display.

DEMO*1 — to turn the demonstration display on or off.

Select “ON” to activate the demonstration display (the demonstration starts about 10 seconds after the unit is turned off).

Select “OFF” to deactivate the demonstration display.

BEEP*3 — to turn the beeps on or off.

DIM (Dimmer) — to change the brightness of the display.

Select “ON” to dim the display.

Select “OFF” to deactivate the Dimmer.

Switching the REAR/SUB*1Press (SEL) and then press the volume + (REAR) or – (SUB) button.

After 3 seconds, the display returns to normal play mode.

Selecting the desired itemPress (SEL) and the desired button simultaneously.

(SEL) + (2): CT

(SEL) + (3): A.SCRL*2(SEL) + (4): M.DSPL

(SEL) + (4): DEMO*1

(SEL) + (6): BEEP*3

(SEL) + (DSPL): DIM

After the mode setting is completed, the display returns to normal play mode.

To cancel the item, press (SEL) and the desired button simultaneously again.

*1 When the unit is turned off.

*2 When MD or CD is played.

*3 The beep sound is output only when the built-in amplifier is used.

22