xConnecting video equipment using the

VIDEO 2 jacks

If you intend to connect video equipment that has composite/S video output jacks, such as a VCR, follow the instructions below.

Using a video signal cable (not supplied) and an audio cord (not supplied), connect the video equipment to the display’s VIDEO 2 jacks.

rear of the display

S video

video (yellow)

audio-L (white)

audio-R (red)

VCR

video and audio cable

(not supplied)

S video cable (not supplied)

Note

When you connect video equipment to both composite video input and S video input jacks, the signal from the S video jack is displayed.

xConnecting an antenna

If you intend to connect an antenna to receive the TV signal, follow the instructions below.

Using the 75-ohm coaxial cable (supplied), connect an antenna to the display’s VHF/UHF jack.

to the VHF/UHF jack

to an antenna

75-ohm coaxial cable (supplied)

US

Note

It is strongly recommended that you connect the antenna using a 75-ohm coaxial cable to get optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it away as far as possible from the display.

11