Option menu
You can adjust the following items using the “Option” menu.
• | PIP | Option | ||
• | Caption Vision |
|
|
|
| PIP : |
| ||
• | Input Sensing |
| On | |
| Input Sensing : | |||
|
|
| Caption Vision : |
|
• | Language |
| Language : | English |
| Menu Position |
| ||
• | Menu Position |
| Menu Lock : | Off |
| Demo Mode : | Off | ||
• | Menu Lock |
| All Reset |
|
|
|
| ||
• Demo Mode |
|
|
| |
• | All Reset |
|
| 1280 × 1024/60 Hz |
|
|
|
|
|
|
|
| Select | Set OK Exit MENU |
xSetting “PIP” (Picture In Picture) (for PC 1/ PC 2 only)
When the “PIP Setting” menu is set to “PIP On,” pictures from two input sources are displayed on the screen at the same time. The main picture is displayed in full size, and the sub picture is displayed smaller in the corner of the screen. Also, you can choose either the sound from the main picture or the sub picture.
Notes
•When using the “PIP” function, if you switch the input using the button or the input select buttons, the “PIP” function may be released.
If it happens, the input source that you have selected fills the entire screen. To use the “PIP” function again, set the “PIP Setting” menu to “PIP On” using the menu system or select “PIP On” by pressing the button (page 15).
•When the “Input Sensing” menu in the “Option” menu is set to “On,” if the computer that is selected for main picture input enters the power saving mode, the display try to detect a signal from the other computer input and display it, if available. At this time, the “PIP” function will be released. To use the “PIP” function again, set the “PIP Setting” menu to “PIP On” using the menu system or select “PIP On” by pressing the button (page 15).
Tip
You can also switch the “PIP” setting by pressing the button repeatedly.
To switch the PIP function on and off
1Press the MENU button.
The main menu appears on the screen.
2Press the M/m buttons to select (Option) and press the OK button.
The “Option” menu appears on the screen.
3Press the M/m buttons to select “PIP” and press the
OK button.
4Press the M/m buttons to select “PIP Setting” and press the OK button.
The “PIP Setting” menu appears on the screen.
Option |
| |||
| PIP |
|
|
|
|
|
|
|
|
| PIP Setting : | PIP On |
|
|
| Sub : | PIP Off |
|
|
| Sub Size : | Large |
|
|
| Sub Position |
|
|
|
| Audio Select : | Sub |
|
|
|
| 1280 × 1024/60 Hz | ||
|
|
|
|
|
| Select | Set OK | Exit MENU |
5Press the M/m buttons to select the desired mode and press the OK button.
•PIP On: Pictures from two input sources are displayed on the screen. You can select the input for sub picture, the sub picture’s position, size, and audio input source.
•PIP Off: The “PIP” function is turned off.
To select the input for sub picture (PIP function: On)
1Press the MENU button.
The main menu appears on the screen.
2Press the M/m buttons to select (Option) and press the OK button.
The “Option” menu appears on the screen.
3Press the M/m buttons to select “PIP” and press the
OK button.
4Press the M/m buttons to select “PIP Setting” and press the OK button.
The “PIP Setting” menu appears on the screen.
5Press the M/m buttons to select “PIP On” and press the OK button.
6Press the M/m buttons to select “Sub” and press the OK button.
The “Sub” menu appears on the screen.
Option |
| |||
| PIP On |
|
|
|
| PIP Setting : | PIP On |
|
|
| Sub : | TV |
|
|
| Sub Size : | VIDEO1 |
|
|
| Sub Position | VIDEO2 |
|
|
| Audio Select : | Sub |
|
|
|
| 1280 × 1024/60 Hz | ||
|
|
|
|
|
| Select | Set OK | Exit MENU |
7Press the M/m buttons to select the desired input source and press the OK button.
•TV: A TV program is displayed in the
•VIDEO 1: The picture sent from the video equipment connected to the display’s video input jacks for VIDEO 1 is displayed in the
•VIDEO 2: The picture sent from the video equipment connected to the display’s video input jack for VIDEO 2 is displayed in the
30