xAdjusting the picture’s sharpness manually
(Phase/Pitch) (for PC 2 only)
You can adjust the picture’s sharpness as follows.
1Set the resolution to 1280 × 768
2Load the CD-ROM.
3Start the CD-ROM, select the area and model, and display the test pattern.
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4Press the MENU button.
The main menu appears on the screen.
5Press the M/m buttons to select 
(Screen) and press the OK button.
The “Screen” menu appears on the screen.
6Press the M/m buttons to select “Phase” and press the OK button.
The “Phase” adjustment menu appears on the screen.
7Press the M/m buttons until the horizontal stripes are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust the pitch using the following procedures.
9Press the M/m buttons to select “Pitch” and press the OK button.
The “Pitch” adjustment menu appears on the screen.
10Press the M/m buttons until the vertical stripes disappear.
Adjust so that the vertical stripes disappear.
11 Click [END] on the screen to turn off the test pattern.
24
xAdjusting the picture’s position manually
(H Center /V Center) (for PC 2 only)
If the picture is not in the center of the screen, adjust the picture’s centering as follows.
1Set the resolution to 1280 × 768
2Load the
3Start the
For Windows
Click [Utility] t [Windows]/[Win Utility.exe].
For Macintosh
Click [Utility] t [Mac]/[Mac Utility].
4Press the MENU button.
The main menu appears on the screen.
5Press the M/m buttons to select 
(Screen) and press the OK button.
The “Screen” menu appears on the screen.
6Press the M/m buttons to select “H Center” or “V
Center” and press the OK button.
The “H Center” adjustment menu or “V Center” adjustment menu appears on the screen.