Setup

Before using your display, check that the following items are included in your carton:

•LCD display

•Remote control

•Size AAA batteries (2)

•Power cord

•HD15-HD15 video signal cable (analog RGB)

•DVI-D video signal cable (digital RGB)

•Audio cord (stereo miniplug)

•75-ohm coaxial cable

•CD-ROM (utility software for Windows/Macintosh, Operating Instructions, etc.)

•Warranty card

•Quick Setup Guide

Setup 1:Open the stand

Note

The stand is folded at the factory. Be sure not to place the display vertically with the stand as it is. Otherwise, the display may topple over.

Setup 2:Connect the cables

•Turn off the display, computer, and other equipment before connecting them.
•If you intend to connect:
–A computer equipped with an HD15 output connector (analog RGB)
t See “Connecting a computer using the PC 2 connectors” on this page.
–Video equipment that has component video output jacks
t See “Connecting video equipment using the
VIDEO 1 jacks” (page 10).
–Video equipment that has composite/S video output jacks

t See “Connecting video equipment using the

VIDEO 2 jacks” (page 11).
–An antenna
t See “Connecting an antenna” (page 11).

Note

Do not touch the pins of the video signal cable connector as this might bend the pins.

Remove the connector cover.

Push the hooks and draw the connector cover towards you.

connector cover

xConnecting a computer using the PC 1 connectors

If you intend to connect a computer equipped with a DVI connector (digital RGB), follow the instructions below.

Using the supplied DVI-D video signal cable (digital RGB) and the supplied audio cord, connect the computer to the display’s PC 1 connectors.

US

to the DVI-D

to the

audio input

input

for PC 1

to the computer’s DVI output connector (digital RGB)

 

DVI-D video signal

to the audio output

cable (digital RGB)

(supplied)

of the computer

 

 

 

 

 

 

audio cord

 

(supplied)

 

 

xConnecting a computer using the PC 2 connectors

If you intend to connect a computer equipped with an HD15 connector (analog RGB), follow the instructions below.

Using the supplied HD15-HD15 video signal cable (analog RGB) and the supplied audio cord, connect the computer to the display’s PC 2 connectors.

Connect the computer according to the following illustrations.

9