Sony MFM-HT75W, MFM-HT95 Watching the TV, Setting the TV channels, Changing the TV channel, Skipping unnecessary channels, Choosing between cable and UHF, VHF

Watching the TV

Setting the TV channels

To watch TV programs, you need to run “Auto Program” to set up your channels.

Perform the following “Auto Program” procedure before you watch TV programs for the first time.

For details on the use of the menu and buttons, see “Navigating the menu” on page 15.

1Press the MENU button.2Press the M/m buttons to select (Channel) and press the OK button.

The “Channel” menu appears on the screen.

3Press the M/m buttons to select “Auto Program” and press the OK button.

The “Auto Program” menu appears on the screen.

4Press the M/m buttons to select “OK” and press theOK button.

The display starts scanning and preparing channels automatically.

Channel number and on-screen message appear.

5Press the MENU button to exit the menu screen after Auto Program is completed.

Changing the TV channel

Press the 0-9 buttons to input a channel number.

The channel changes after 3 seconds. Press the ENT (enter) button to select immediately.

Use the CH +/– buttons to scan through the channels.

or

Tip

When you press and hold the CH + or – button, the channel number will change rapidly.

Skipping unnecessary channels

You can skip unnecessary channels when selecting channels using the CH +/– button.

1Press the MENU button.

2Press the M/m buttons to select (Channel) and press the OK button.

The “Channel” menu appears on the screen.

3Press the M/m buttons to select “Channel Skip/Add” and press the OK button.

The “Channel Skip/Add” menu appears on the screen.

4Press the M/m buttons to select the channel you want to skip and press the OK button.

Tip

To scroll through the list, press and hold the M/m buttons.

5Press the M/m buttons to select “Skip” and press the OK button.

If you want to restore skipped channel, select “Add.”

6Press the MENU button to exit the menu screen.

Choosing between cable and UHF/

VHF

To set the UHF/VHF channels, you need to set the “Cable” menu to “Off” by following the instructions below.

1Press the MENU button.

2Press the M/m buttons to select (Channel) and press the OK button.

The “Channel” menu appears on the screen.

3Press the M/m buttons to select “Cable” and press the OK button.

The “Cable” menu appears on the screen.

4Press the M/ms buttons to select the desired mode and press the OK button.

•On: The cable TV channels can be set.

•Off: The UHF/VHF channels can be set.

Note

You cannot set and receive cable TV channels and UHF/VHF channels at the same time.

14