Tape
Loading a tape
1 Press TAPE A/B repeatedly to select deck A or B.
2
3 Insert a tape in deck A or B with the side you want to play/record facing forward.
With the side you want to play/record facing forward.
Playing a tape
You can use TYPE I (normal) tape.
1
2 Press DIRECTION repeatedly to select
gto play one side. Select j*1 to play both sides.
To play both decks in succession, select “RELAY” (Relay Play)* 2.
3 Press hH (or nN on the remote).
Press hH (or nNon the remote) again to play the reverse side. The tape starts playing.
Tape presence indicator
*1 The deck stops automatically after repeating the sequence five times.
*2 Relay Play always follows this cyclic sequence up to five times, then stops:
Deck A (front side) t Deck A (reverse side)
tDeck B (front side) t Deck B (reverse side)
Other Operations
To | Do this |
Stop play | Press x. |
|
|
Pause | Press X. Press again to |
| resume play. |
|
|
Press mor M. | |
|
|
Remove the cassette | Press Z. |
|
|
Searching for the beginning of the current or the next track (AMS)*
To go forward
Press >during playback when N lights in the display.
“TAPE A (or TAPE B) >>> +1” appears.
Press .during playback when n lights in the display.
“TAPE A (or TAPE B) <<< +1” appears.
To go back
Press .during playback when N lights in the display.
“TAPE A (or TAPE B) <<<
Press >during playback when n lights in the display.
“TAPE A (or TAPE B) >>>
* AMS (Automatic Music Sensor)
Tip
When a tape is inserted, corresponding forward/ reverse indicators light.
Note
The AMS function may not operate correctly under the following circumstances:
–When the unrecorded space between songs is less than 4 seconds long.
–When the system is placed near a television.
Tape