Selecting the surround

effect

Press CINEMA SPACE on the remote repeatedly to turn the surround effect on or off.

Each time you press the button, the display changes as follows:

C.SPACE LOW* t C.SPACE MID* t C.SPACE HIGH* t SURR ON (on) t SURR OFF (off)

* CINEMA SPACE is the surround effect for movies.

Note

When you select other sound effects, the surround effect will be canceled.

Selecting the surround

system

(MHC-RV6 only)

Press SURROUND SPEAKER MODE to select the sound mode you want.

LINK : Reproduces the same sound with the different output level.

MATRIX SURR : Reproduces only the reverberation components with the vocals removed.

Note

The MHC-RV5 remote has the above button, but the function is inactive.

Display

Turning off the display

— Power Saving Mode

The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode).

Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears.

To cancel the Power Saving Mode

Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows:

Demonstration display t Clock display* t No display (Power Saving Mode)

* The clock is displayed only if you set the clock.

Tip

The timer continues to operate in Power Saving Mode.

Note

You cannot perform the following operations in Power Saving Mode.

—setting the clock

—changing the AM tuning interval (except for Middle Eastern and Philippine models)

—turning on the system by pressing the function buttons

—switching the MD (VIDEO) function

28GB