Load a disc and load a recordable tape into deck B.

Recording a CD by specifying track order

— Program Edit

When programing, make sure the playing time for each side do not exceed the length of one side of the tape.

1

2 Program disc tracks following step 1 to

6 in “Programing VIDEO CD/CD tracks” on page 12.

3 Press CD SYNC.

Deck B stands by to record in the direction of the indicator on hH (the right indicator lights to record on the forward side and the left indicator lights to record on the reverse side). The disc player stands by for playback.

4 Press DIRECTION repeatedly to select

gto record on one side. Select j (or RELAY) to record on both sides.

5 Press REC PAUSE/START.

Recording starts.

To record a disc with MP3 files by specifying folder/file order

After step 1, program the MP3 files following the procedures in “ To program the MP3 files” on page 12, then proceed to step 3 above.

Tip

To check the required tape length for recording a disc, press EDIT until “ EDIT” flashes after you have loaded disc and pressed CD. The required tape length for the currently selected CD appears after the total playing time for side A and side B appears respectively (Tape Select Edit).

Note

You cannot use Tape Select Edit for discs containing over 20 tracks or MP3 files.

Timer-recording radio

programs

You can record a preset radio station from a specified time.

To timer-record, you must first preset the radio station (see “ Presetting radio stations” on page 20) and set the clock (see “ Setting the clock” on page 9).

1 Tune in the preset radio station (see “Listening to the radio” on page 22).

2 Press CLOCK/TIMER SET on the remote.

“ DAILY 1 SET” appears.

3 Press v or V repeatedly to select “REC SET”, then press ENTER.

“ON” appears and the hour indication flashes.

4 Set the time to start recording.

Press v or V repeatedly to set the hour, then press B.

The minute indication starts flashing.

Press v or V repeatedly to set the minute, then press ENTER.

5 Repeat step 4 to set the time to stop recording.

The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “ TUNER FM 5” ), then the original display appears.

6 Load a recordable tape into deck B.

7 Press ?/1 to turn off the system.

When the recording starts, the volume level is set to the minimum.

continued

Tape

25GB