Recording to a tape
— CD Synchro Recording/Recording Manually/Program Edit
You can record from a disc, tape (or connected components) or radio. You can use TYPE I (normal) tapes. The recording level is adjusted automatically.
Steps | Recording from a disc | Recording from a disc/tape/radio |
| (CD Synchro Recording) | manually |
|
|
|
1 | Load a recordable tape into deck B. |
|
2 | Press CD. | Press CD, TAPE A/B or TUNER/BAND. |
3 | Load the disc you want to record. | Load the disc or tape (or other audio |
|
| source), or tune in the station you want |
|
| to record. |
|
|
|
4 | Press CD SYNC. | Press REC PAUSE/START. |
| Deck B stands by for recording. |
|
| “ REC” flashes. |
|
|
| |
5 | Press DIRECTION repeatedly to select gto record on one side. Select j | |
| (or RELAY) to record on both sides. |
|
6 | Press REC PAUSE/START. | Press REC PAUSE/START, and then start |
| Recording starts. | playing the desired source to record. |
|
|
|
To stop recording
Press x.
Tips
•If you want to record from the reverse side, press TAPE A/B to select deck B after step 1. Press hH (or nNon the remote) to start playback of the reverse side, then press xto start recording. The TAPE B reverse indicator lights up.
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•For recording from the radio:
If noise is heard while recording from the radio, move the respective antenna to reduce the noise.
Note
You cannot listen to other sources while recording.