Hooking up optional components (continued)
Notes
•The video game machine image may appear on the TV screen even if the system is turned off.
•See “ Selecting the sound effect” on page 27 for video game sound effects.
•If you press GAME while the system is off, the system turns on, the function switches to GAME, and the equalizer also switches to the GAME EQ (previously selected effect).
•If you press GAME while the system is on, the function switches to GAME and the equalizer automatically switches to the GAME EQ (previously selected effect).
Listening to audio from a
connected component
Listening to a connected MD deck
1 Connect the audio cords.
See “ Hooking up optional components” on page 35.
2 Press MD (VIDEO).
Start playing the connected component.
Listening to a connected VCR
1 Connect the audio cords.
See “ Hooking up optional components” on page 35.
2 Press MD (VIDEO).
Hold down MD (VIDEO) and press ?/1. This switches the “ MD” function to
“VIDEO” . Once you enable the “ VIDEO” function, just press MD (VIDEO).
Notes
•If you cannot select “ MD” when you press MD (VIDEO), press ?/1 while holding down MD (VIDEO) when the system is on. “ VIDEO” will be switched to “ MD” . To return to “ VIDEO” , do the same procedure.
•When you connect a VIDEO CD deck, set to “ MD” .
Recording on a connected
component
Making an analog recording on an MD
1 Connect an optional audio cable.
See “ Hooking up optional components” on page 35.
2 Start recording.
Refer to the operating instructions provided with the connected component.
Making an analog recording from a VIDEO CD to a video tape
1 Connect an optional audio cable from the MD/VIDEO (AUDIO) OUT jacks and the supplied video cable from the VIDEO OUT jack to your VCR.
2 Start recording.
Refer to the operating instructions provided with the connected component.
Note
You cannot record from a VIDEO CD to an MD digitally. When you record from a VIDEO CD to an MD, make an analog recording on MD.