Sony MHC-S7AV Programming the CD, tracks

— Program Play

You can make a program of up to 25 tracks from all the CDs in the order you want them to be played.

1 Turn FUNCTION to select “CD”, then place a CD.

2 Press PLAY MODE repeatedly until “PROGRAM” appears in the display.

3 Press one of the DISC 1–3 buttons to select a CD.

To program all the tracks on a CD at once, proceed to step 5 while “AL” appears in the display.

4 Press . or > (CD) repeatedly until the track you want appears in the display.

5 Press ENTER (A/V amplifier or remote).

The track(s) is (are) programmed. The program step number appears, followed by the total playing time.

6 To program additional tracks, repeat steps 3 to 5.

Skip step 3 to select tracks from the same disc.

7 Press N (CD) (or CD H on the remote).

To	Press
Cancel Program Play	PLAY MODE repeatedly
	when the playback is stopped
	until “1 DISC” or “ALL
	DISCS” appears in the display.

Check the program	CHECK on the remote
	repeatedly. After the last track,
	“CHECK END” appears in the
	display.

Clear a track	CLEAR on the remote when
	playback is stopped. Each time
	you press the button, a track is
	cleared from the end of the
	program.

Clear a specific track	CHECK on the remote
	repeatedly until the track
	number you want to clear
	appears, then press CLEAR on
	the remote.

Add a track to the	1 Press one of the DISC 1–3
program when		buttons to select a CD.
playback is stopped	2	Press . or > (CD)

		repeatedly to select the
		track.
	3	Press ENTER (A/V
		amplifier or remote).

Tips

•The program you made remains in the system’s memory even after it has been played back. Press N (CD) to play the same program again.

•If “--.--” appears instead of the total playing time during programming, this means:

–you have programmed a track number which exceeds 20.

–the total playing time has exceeded 100 minutes.