Other Features
Changing the spectrum
analyzer display
Press and hold DISPLAY for more than 2 seconds.
Each time you press the button, the display changes as follows:
SPECTRUM ON y SPECTRUM OFF
To adjust the brightness
of the display
1
2 Press P or p repeatedly to select “DIMMER”.
3
4 Press O or o repeatedly to select the setting you want.
The setting is stored.
5 Press ENTER (A/V amplifier or remote).
Falling asleep to music
— Sleep Timer
You can set the system to turn off at a preset time, so you can fall asleep to music.
Press SLEEP on the remote.
Each time you press the button, the minute display (the
OFF t AUTO* t 90min t 80min t 70min t … t 10min
*The power turns off when the current CD or tape finishes playback (for up to 100 minutes).
To | Press |
Check the remaining | SLEEP once. |
time |
|
|
|
Change the time to | SLEEP repeatedly to select |
turn off | the time you want. |
|
|
Cancel the Sleep | SLEEP repeatedly until |
Timer | “SLEEP OFF” appears. |
|
|
Waking up to music
— Daily Timer
You can wake up to music at a preset time every day. Make sure you have set the clock (see “Setting the time” on page 13).
1 Prepare the music source you want to play.
•CD: Load a CD. To start from a specific track, make a program (see “Programming the CD tracks” on page 15).
•Tape: Load a tape with the side you want to play facing forward.
•Radio: Tune in the preset station you want (see “Listening to the radio” on page 17).
2 Adjust the volume.
3 Press CLOCK/TIMER (or CLOCK/TIMER SET on the remote).
“DAILY1 SET” appears.
4 Press O or o repeatedly to select “DAILY 1 (or 2)”, then press ENTER (A/V amplifier or remote).
“ON” appears and the hour indication flashes.
continued
Features Other
29