Setting the time
1
2 Press CLOCK/TIMER (or CLOCK/TIMER SET on the remote).
When you set the time for the first time, proceed to step 5.
3 Press O or o repeatedly to select “CLOCK SET”.
4 Press ENTER (A/V amplifier or remote). 5 Press O or o repeatedly to set the hour. 6 Press ENTER (A/V amplifier or remote).
7 Press O or o repeatedly to set the minutes.
8 Press ENTER (A/V amplifier or remote).
Tip
If you have made a mistake or want to change the time, start over from step 2.
Note
The clock settings are canceled when you disconnect the power cord or if a power failure occurs.
Saving the power in
standby mode
Press DISPLAY repeatedly when the power is off.
Each time you press the button, the system switches cyclically as follows:
Demonstration t Clock t Power Saving Mode
To cancel the Power Saving Mode
Press DISPLAY once to show the demonstration, twice to show the clock display.
Tips
•?/1indicator lights up even in the Power Saving Mode.
•The timer functions during the Power Saving Mode.
Note
During the Power Saving Mode, the following functions do not work:
–Setting the time.
–Changing the AM tuning interval (except for European and Middle Eastern models).
–One Touch Play function.
Started Getting
13