Toshiba TDP-MT500 Operational range of remote controller Front of projector, Vertical directions

PREPARATION

Operational range of remote controller

Front of projector Rear of projector

30˚

30˚30˚

Operate the remote controller within a distance of 10 m from the projector, pointing the light beam at the remote control photo-sensor (front or rear) of the projector.

•Keep the remote controller photo-sensor

	away from the direct sun light or fluores-
30˚	cent lamp light.

•Keep the remote controller photo-sensor at least 2 m apart from fluorescent lamps. Otherwise, the remote controller may malfunction.

•If there is an inverter-operated fluores- cent lamp near the remote controller, the remote controller operation may become unstable. On this occasion, stick the at- tached protection sticker on the photo- sensor that is closer to the fluorescent lamp.

When operating the remote controller forwarding the light beam to projector screen, keep the distance from the remote controller to the projector via the screen within about 6m. The operable range of the remote controller, however, depends on the characteristics of the screen.

Vertical directions

15˚	15˚
15˚	15˚

Vertical directions (When the projector is suspended from ceiling)

15˚ 15˚

14