Toshiba TDP-MT500 owner manual On the memory for projected image quality, Setting With Menus

MEMORY 3

INSTALLATION MENU

SETTING WITH MENUS

INSTALLATION...					ITEM	SETTING	FUNCTION
					LANGUAGE ---------	5言語	Selects a language used for displays on the screen, such as
		LANGUAGE
							menus. Adjusts computer video images.
	RGB & COMPONENT
					RGB & COMPONENT		Adjusts computer video images.
		MIRROR
		KEYSTONE			AUTO * ---------------------------------------		Selecting Auto and pressing ENTER button automatically
							adjust position and size of the projected images in
		PATTERN
							accordance with the image signals from the computer.
					FREQUENCY *－15～＋15
DIASPLAY MENU							If any wide streak pattern appears on the projected images, it
							can be adjusted with this setting while viewing the images.
					PHASE *	0 ～ 31
INSTALLATION...							If any flicker or blur appears on the projected images, it can be
		RGB & COMPONENT			H.POS *	－30 ～ +30	adjusted with this setting while viewing the images.
AUTO			YES?				Moves display position of projected images in horizontal
FREQUENTCY				0	V. POS *	－30 ～ +30	direction.
							Moves display position of projected images in vertical direction.
PHASE				15
					MIRROR	FLOOR FRONT	Select this setting with the projector set on the floor when
H. POS				0
							viewing the projected images from the front side.Normally,
V. POS				0
						CEILING FRONT	select this setting.
					----------		Select this setting with the projector suspended from the
					------------	FLOOR REAR ------	ceiling when viewing the projected images from the front side.
							Select this setting with the projector set on the floor when
					-----------	CEILING REAR -----	viewing the projected images from the rear side of the screen.
							Select this setting with the projector suspended from the
							ceiling when viewing the projected images from the rear side
					KEYSTONE ---	－12～＋12--------	of the screen.
							Select this setting when correcting trapezoidal distortion.
					PATTERN -----------------------------------		Normally, select “0”.
							Pressing ENTER button reveals the test pattern for focus
							adjustment.

•The items with * mark function only for 1080i, 720p, 525p, and 625p input signals and input signals from DVI terminal.

•The varying range of the vertical position depends on the type of the input signal. With some values the vertical position may not change, but this is not a failure.

•With the inputs from DVI-DIGITAL terminal, no change appear on the projected images with adjustment of the dividing ratio and fine, but this is not a failure.

•Without input signals, only some of the above items can be changed.

On the memory for projected image quality

This projector allows each item in the picture quality setting menu and the professional-use picture quality setting menu (except for color temperature use-adjustment) to be adjusted to up to three kinds of favorable picture quality for each input signal.

Input that allows the setting	Number of settings	INSTALLATION...
VIDEO	3
			SAVE
S-VIDEO	3
			MEMORY 1
COMPONENT 1, 2	3
DVI-ANALOG/DIGITAL	3		MEMORY 2

To store the settings:

(Refer to Page 25 for how to set menus.)

1.Set an item in the picture quality setting menu and the professional-use picture quality setting menu.

2.Reveal the signal setting menu.

3.Select “Store the setting “by pressing {, } buttons.

4.Press ENTER button.

The setting storage menu appears.

5.Select the memory where the setting is to be stored by pressing {, } buttons.

6.Press ENTER button.

The setting is stored in the memory. To cancel the menus:

7. Press MENU button.

To apply the set picture quality:

1. Press MEMORY1, 2, or 3 button.

The picture quality of the projected image comes to the set quality.

30