Tape – Recording
Recording your favorite CD tracks on a tape
— CD-TAPE Synchro Recording
You can record a whole CD on a tape. You can use TYPE I (normal) tape. The recording level is adjusted automatically.
Use buttons on the CD player for the operation.
1 Load a recordable tape into deck B.
2 Press TAPE A/B to select deck B, then press nN repeatedly to select recording side. And press x to stop playback.
3 Press CD and load a disc you want to record.
4 Press CD SYNC.
Deck B stands by for recording.
“REC” flashes.
5 Press PLAY MODE/DIRECTION repeatedly to select “g” to record on one side. Select “j” (or “RELAY”) to record on both sides.
6 Press z START.
Recording starts.
To stop recording
Press x.
To record a disc by specifying track order
You can record only your favorite CD tracks using Program Play. Between steps 2 and 3, perform steps 1 to 5 of “Creating your own program” (page 10).
Also, you can check the required tape length for recording a CD. Press PROGRAM EDIT on the remote after you have loaded a CD in CD function. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively (Tape Select Edit).
Note
You cannot use Tape Select Edit for discs containing over 20 tracks or MP3 files.
Tips
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•If you select both sides recording and the tape reaches the end of the front side