Recording on a tape manually
— Manual Recording
You can record just the portions you like from a CD, tape or radio program on a tape.
You can also record from connected components (see “Hooking up optional components” on page 25).
Use buttons on the CD player for the operation.
1 Load a recordable tape into deck B.
2 Press TAPE A/B to select deck B, then press nN repeatedly to select recording side. And press x to stop playback.
3 Press CD, TAPE A/B or TUNER/BAND to select the desired source to record.
•CD: To record from this system’s CD player.
•TAPE: To record from this system’s tape deck A.
•TUNER: To record from this system’s tuner.
•MD or VIDEO: To record from the optional component connected to the MD (VIDEO) IN jacks.
4 Press z START.
Deck B stands by for recording. “REC” flashes.
5 Press PLAY MODE/DIRECTION repeatedly to select “g” to record on one side. Select “j” (or “RELAY”) to record on both sides.
6 Press z START, then start playing the desired source to record.
Recording starts.
Other operations
To | Do this |
Stop recording | Press x. |
|
|
Pause recording | Press z START. Press again to |
| resume recording. |
|
|
Notes
•You cannot listen to other sources while recording.
•If TAPE B is selected in step 3, silence is recorded.
Tips
•For recording from the radio:
If noise is heard while recording from the radio, move the respective antenna to reduce the noise.
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.