Timer
Falling asleep to music
— Sleep Timer
You can set the system to turn off after a certain time, so that you can fall asleep to music.
Use buttons on the remote for the operation.
Press SLEEP.
Each time you press the button, the minute display (the
OFF t AUTO* t 90min t 80min t 70min
t… t 10min
*The system automatically turns off in 100 minutes or after the current disc or tape finishes playing.
Other operations
To | Do this |
Check the | Press SLEEP once. |
remaining time** |
|
|
|
Change the time | Press SLEEP repeatedly to select |
to turn off | the time you want. |
|
|
Cancel the Sleep | Press SLEEP repeatedly until |
Timer Function | “SLEEP OFF” appears. |
|
|
**You cannot check the remaining time if you select “AUTO”.
Tip
You can use the Sleep Timer, even if you have not set the clock.
Waking up to music
— Daily Timer
You can wake up to music at a preset time. Make sure you have set the clock (see “Setting the clock” on page 8).
Use buttons on the remote for the operation.
1 Prepare the sound source you want to play.
•CD: Load a disc. To start from a specific track, make a program (see “Creating your own program” on page 10).
•Tape: Load a tape.
•Tuner: Tune in the preset radio station (see “Listening to the radio” on page 13).
2 Press VOL +/– (or turn VOLUME on the CD player) to adjust the volume.
3 Press CLOCK/TIMER SET.
4 Press ENTER.
“ON” appears and the hour indication flashes.
5 Set the time to start playing.
Press . or > repeatedly to set the hour, then press ENTER.
The minute indication flashes.
Press . or > repeatedly to set the minute, then press ENTER.
6 Set the time to stop playing following the same procedure as step 5.
7 Press . or > repeatedly until the desired sound source appears.
Each time you press the button, the display changes cyclically as follows:
tTUNER y CD PLAY T t TAPE PLAY T
8 Press ENTER.
The start time, the stop time, and the sound source appear in turn, before the original display returns.
9 Press ?/1 to turn off the system.
continued