Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component.

To the audio input jack of a sub woofer

To the digital input jack of a digital component

To the audio input jacks of an

 

From the audio output jacks of an

analog component

 

analog component

 

 

 

Optional
ACD DIGITAL (OPTICAL) OUT jack (European and Australian models only)

Use a digital optical cable (square, not supplied) to connect an optional component (such as an MD deck) to this jack. You can then record digital audio from this system.

Note

There is no digital audio output from this jack during playback of MP3 audio tracks.

BMD (VIDEO) IN L/R jacks

Use audio cords (not supplied) to connect an optional analog component (MD deck or VCR, etc.) to these jacks. You can then record or listen to from the component through this system.

CMD (VIDEO) OUT L/R jacks

Use audio cords (not supplied) to connect an optional analog component (MD deck or VCR, etc.) to these jacks. You can then output audio to the component from this system.

DSUB WOOFER OUT jack (Except for European model)

Use an audio cord (not supplied) to connect the optional sub woofer* to this jack. You can then output audio to the component from this system.

* SA-WZ8 is recommended.

Note

The effects may be limited or noise may occur depending on the connected sub woofer or the type of music being played. For details, consult your nearest Sony dealer.

Components

25GB