
Getting Started
Hooking up the system
Perform the following procedures 1 to 5 to hook up your system using the supplied cords and accessories. Australian model is used for illustration purpose.
FM lead antenna | AM loop antenna |
CD player/ | Amplifier/ |
Tuner | Tape deck |
Front
speaker (right)
Preparation
Place the components as shown below.
Amplifier/ | CD player/ |
Tape deck | Tuner |
1Connect the system control cables to the SYSTEM CONTROL connectors on the tape deck.
Connect to the same numbered jack in the order indicated on the rear panel.
Note
Front speaker (left)
2Connect the speakers.Connect the speaker cords to the SPEAKER terminals on the tape deck and to the terminals on the speakers as shown below.
|
| L |
R |
|
|
S | PE | AKE |
| ||
|
|
Speakers |
|
Black (#) | Gray (3) |
Black (#) | Gray (3) |
The system cable is used to send signals and electricity between the components for interlinked operation. Be sure to insert the connector horizontally until it clicks into place. Otherwise the system will not operate correctly.
6GB