Sony MHC-WZ5, MHC-WZ50 Specifications, 32GB, European model:, Amplifier section, CD player section, Cleaning the tape heads, To save a tape permanently, Except for European model:

To save a tape permanently

To prevent a tape from being accidentally recorded over, break off the cassette tab from side A or B as illustrated.

Break off the cassette tab

If you later want to reuse the tape for recording, cover the broken tab with adhesive tape.

Before placing a cassette in the tape deck

Take up any slack in the tape. Otherwise, the tape may get entangled in the parts of the tape deck and become damaged.

When using a tape longer than 90 minutes

The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding frequently. The tape may get entangled in the tape deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use. Be sure to clean the tape heads before you start an important recording or after playing an old tape. Use a separately sold dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette.

Demagnetising the tape heads

Demagnetise the tape heads and the metal parts that have contact with the tape after every 20 to 30 hours of use with a separately sold demagnetising cassette. For details, refer to the instructions of the demagnetising cassette.

Specifications

Amplifier sectionEuropean model:

DIN power output (rated): 75 + 75 watts (6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference):

100 + 100 watts (6 ohms at

1 kHz, 10% THD)

Music power output (reference):

200 + 200 watts (6 ohms at

1 kHz, 10% THD)

Except for European model:

The following measured at AC 120, 220, 240 V AC, 50/60 Hz (Australian model at 240 V AC, 50/60 Hz, Korean model at 220 V AC, 60 Hz, Taiwan model at 120 V AC, 50/60 Hz)

DIN power output (rated): 100 + 100 watts (6 ohms at 1 kHz, DIN)

Continuous RMS power output (reference):

140 + 140 watts (6 ohms at

1 kHz, 10% THD)

Inputs

MD (VIDEO) IN (phono jacks):

Voltage 450 mV/250 mV, impedance 47 kilohms

Outputs

PHONES (stereo mini jack):

Accepts headphones of 8 ohms or more

MD (VIDEO) OUT (phono jacks):

Voltage 250 mV, impedance 1 kilohms

FRONT SPEAKER: Use only the supplied speaker SS-WZ50/WZ5/ WZ5E

SUB WOOFER (Except for European model): Voltage 320 mV, impedance 1 kilohms

CD player section
System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ=780 nm)
	Emission duration:
	continuous
Frequency response	2 Hz – 20 kHz (±0.5 dB)
Wavelength	780 – 790 nm
Signal-to-noise ratio	More than 90 dB
Dynamic range	More than 90 dB