Step 2: Setting the time
Before you can use the system’s timer functions, set the internal clock.
The clock uses a
The
2,4
1
3,5
1 Press TIMER SET.
The hour indication flashes.
000
2 Press l/L repeatedly to set the hour.
1300
3 Press ENTER.
The minute indication flashes.
1300
4 Press l/L repeatedly to set the minute.
1310
5 Press ENTER.
The clock will begin operating.
To reset the system clockYou can reset the system clock even when the system is on or off.
1Press TIMER SET.
2Press l/L repeatedly until
“SET CLOCK” appears, then press ENTER.
3Repeat step 2 to 5 in “Step 2: Setting the time”.
Tip
If you make a mistake, start over from step 1.
6