Notes on HDMI connections
•The sound is output from the TV speaker only when a playback component and this receiver, as well as this receiver and the TV are connected via the HDMI jack. To output the sound from the supplied speakers and to take advantage of the multi channel surround sound, be sure to
–connect the digital audio jacks on the playback component to the receiver.–turn off or mute the TV’s volume.•The receiver does not support HDMI CONTROL function.•This receiver may not be able to transfer video or audio signals with certain types of components.
•The multi/stereo area audio signals of a Super Audio CD are not output.•Audio signals (sampling frequency, bit length, etc.) transmitted from a HDMI jack may be restricted by the connected component. If the image is poor or no sound is output from the component connected via the HDMI cable, check the setup of the connected component.
•Be sure to turn on the receiver, when video and audio signals of a playback component are being output to a TV through HDMI jacks of the receiver. Unless the power is on, neither video nor audio signals will be transmitted.
•For details on HDMI setup of the connected component, refer to operating instructions supplied with the connected component.
Notes
•When connecting optical digital cords, insert the plugs straight in until they click into place.
•Do not bend or tie optical digital cords.
•Be sure to change the factory setting of the VIDEO 2 input button on the remote so that you can use the button to control your
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.