Sony model HTP-78SS About the indicators on the display, NSW, Name, ALFE, Note, KOPT, MDTS, Note, EHDMI, JCOAX, BSLEEP, Preset, HTuner, station, D.RANGE, Function, Playback

About the indicators on the display

12		3		4	5
SLEEP	L	C	R	DIGITAL	HDMI
LFE	SL		SR	DTS	PL
SW		S			OPT COAX

	qf	qd qs qa q;
Name		Function
ALFE		Lights up when the disc being
		played back contains an LFE
		(Low Frequency Effect) channel
		and the LFE channel signal is
		actually being reproduced.
BSLEEP		Lights up when the sleep timer is
		activated (page 49).

CPlayback The letters (L, C, R, etc.) indicate

channel the channels being played back. indicators The boxes around the letters vary

to show how the receiverdownmixes the source sound.LFront LeftRFront RightCCenter (monaural)

SL	Surround Left
SR	Surround Right

SSurround (monaural or the surround components obtained by Pro Logic processing)

Example:Recording format (Front/ Surround): 3/2.1Sound Field: A.F.D. AUTO

L C R

SW SL SR

D; DIGITAL Lights up when receiver is decoding Dolby Digital signals.

Note

When playing a Dolby Digital format disc, be sure that you have made digital connections.

EHDMI	Lights up when a playback
	component is connected to this
	receiver using a HDMI jack
	(page 17).

6 7

D.RANGE

MEMORY RDS

ST MONO

9 8

Name FunctionFPreset Lights up when using the

station receiver to tune in radio stations indicators you have preset. For details on

presetting radio stations, see page 44.GD.RANGE Lights up when dynamic range compression is activated (page 30).

HTuner	Lights up when using the
indicators	receiver to tune in radio stations
	(page 42), etc.

IMEMORY Lights up when a memory function, such as Preset Memory (page 44), etc., is activated.

JCOAX	Lights up when the DVD input is
	selected.
KOPT	Lights up when the VIDEO 2 or
	SAT input is selected.
L;PL(II)	“; PL” lights up when the
	receiver applies Pro Logic
	processing to 2 channel signals
	in order to output the center and
	surround channel signals.
	“; PLII” lights up when the
	Pro Logic II Movie/Music
	decoder is activated.
MDTS	Lights up when the receiver is
	decoding DTS signals.
	Note
	When playing a DTS format
	disc, be sure that you have made
	digital connections.
NSW	Lights up when the audio signal
	is output from the
	SUBWOOFER jack.

6GB