Manuals / Brands / TV and Video / DVD Player / Sony / TV and Video / DVD Player

Sony model HTP-78SS Calibrating the appropriate settings automatically, Enjoying Dolby Digital and DTS Surround sound, (A. CAL menu), (AUTO FORMAT DIRECT), Enjoying Surround Sound

1 60

Download 60 pages, 813.91 Kb

Calibrating the appropriate settings automatically

(A. CAL menu)

For details, see “6: Calibrating the appropriate settings automatically (AUTO CALIBRATION)” (page 21).

Enjoying Surround Sound

Enjoying Dolby Digital and DTS Surround sound

(AUTO FORMAT DIRECT)

The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound.

VIDEO 1	VIDEO 2	VIDEO 3	DVD	Enjoying
SAT	TV	SA-CD/CD TUNER
2CH	A.F.D.	MOVIE	MUSIC
A.F.D.	2	3	AMP MENU	Surround
1	2	3
Press A.F.D. repeatedly to select
Press A.F.D. repeatedly to select				Sound
the sound field you want.				Sound
the sound field you want.

You can also use SOUND FIELD +/– on the receiver.

For details, see “Types of A.F.D. mode” (page 38).

continued

37GB

Contents

Page WARNING For customers in Europe About This Manual The instructions in this manual are for model The HTP-78SSconsists of: • Receiver • DVD player Table of Contents Description and location of parts Front panel About the indicators on the display Rear panel RM-AAU017 D MOVIE Press to select sound fields (MOVIE) MUSIC (MUSIC) O RETURN EXIT O – exit the menu while the satellite tuner or Blu-ray disc player is displayed on 1: Installing speakers Example of front speaker Installing the speakers on the wall You can install your speakers on the wall 2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm 3 Hang the speakers on the screws Example of installing the speakers on the wall 2: Connecting speakers ASpeaker cord (supplied)a) Note on speakers 3:Connecting the audio/ video components Component to be connected AAudio cord (not supplied) If you connect a DVD recorder AOptical digital cord (not supplied) BAudio cord (not supplied) CCoaxial digital cord (supplied) •Do not bend or tie optical digital cords Tips •All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies –turn off or mute the TV’s volume ACoaxial digital cord (supplied) BHDMI cable (not supplied) COptical digital cord (not supplied) Notes on HDMI connections 4: Connecting the antennas 5:Preparing the receiver and the remote 6: Calibrating the automatically appropriate settings Example 2 Set up the optimizer microphone Performing Auto Calibration Press AMP MENU, then press AUTO CAL The measurement process will take a few minutes to complete The table below shows the display when measurement starts After you have finished Error codes To rectify the error Error code and remedies Warning codes To change the settings manually Warning codes and solutions 7:Adjusting the speaker levels and balance To turn off the test tone Selecting a component To mute the sound To avoid damaging your speakers Listening/Watching a component Adjust to a suitable volume Set up the DVD player Refer to “Quick Setup Guide” supplied with the receiver You can also use INPUT SELECTOR on this receiver to select “DVD” Watching a DVD 28GB Navigating through menus To return to the previous display To exit the menu Overview of the menus Menu Parameters Settings 30GB Initial setting 31GB Adjusting the level LEVEL menu parameters Adjusting the tone TONE menu parameters Settings for the surround sound SUR menu parameters Settings for the tuner Settings for the audio TUNER menu parameters AUDIO menu parameters Settings for the system SYSTEM menu parameters xSL DIST. (Surround left speaker distance) xSR DIST. (Surround right speaker distance) Also, the center speaker cannot be set more than For example, setting the center speaker distance xSUR PL Calibrating the appropriate settings automatically Enjoying Dolby Digital and DTS Surround sound Types of A.F.D. mode Selecting a preprogrammed sound field Sound Surround Enjoying 39GB Types of sound field available About DCS (Digital Cinema Sound) About CINEMA STUDIO EX modes To turn off the surround effect for movie/music Listening to FM/AM radio If you cannot tune in a station In case of poor FM stereo reception Presetting radio stations Using the controls on the receiver Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly Description of program types Program type Description Enjoying the DIGITAL MEDIA PORT AVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Using the Sleep Timer Changing button assignments Categories and the corresponding buttons To clear all remote button assignments Glossary Precautions On safety On power sources On heat buildup On placement On operation If you encounter color irregularity on a nearby TV screen If color irregularity is observed Troubleshooting Audio Video Tuner If you are unable to remedy the problem using the troubleshooting guide Remote commander Error messages If the problem persist Reference sections for clearing the receiver’s memory Specifications • Subwoofer (SS-WP1100) Supplied speakers Supplied accessories Design and specifications are subject to change without notice 57GB Index Page (1) Sony Corporation