Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time.Press SLEEP repeatedly while the power is on.Each time you press the button, the display changes cyclically as follows:Note
If you press any buttons on the remote or receiver after the display dims, the display brightens up. After a while, the display dims again if no button is pressed.
Tip
To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled.
Using the Remote
Changing button assignments
You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the VIDEO 1 jacks on the receiver, you can set the VIDEO 1 button on this remote to control the DVD recorder.
1 Hold down the input button of which you want to change the assignment.Example: Hold down VIDEO 1.2 Referring to the table below,press the corresponding button for the category you want.Example: Press 4.Now you can use the VIDEO 1 button tocontrol the DVD recorder.Using theRemote
continued
49GB