Manuals / Brands / TV and Video / DVD Player / Sony / TV and Video / DVD Player

Sony model HTP-78SS After you have finished, Error codes, To rectify the error, Error code and remedies, Error and warning codes, Note, Tips, code, 23GB, Error, ERROR, ERROR

1 60

Download 60 pages, 813.91 Kb

When measurement ends, “COMPLETE” appears on the display and the settings are registered.

After you have finished

Disconnect the optimizer microphone from the receiver.

Note

Auto Calibration cannot detect the sub woofer. Therefore, all sub woofer settings will be maintained.

Tips

•When Auto Calibration starts:

–Stand some distance from the speakers and the listening position to avoid measurement failure. This is because test signals are output from the speakers during measurement.

–Avoid making noise to get a more accurate measurement.

•The Auto Calibration function will be canceled when you do the following during the measurement process:

–Press ?/1 or MUTING.–Press input buttons on the remote or INPUT SELECTOR on the receiver.–Change the volume level.–Press AUTO CAL again.

Error and warning codes

Error codes

When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each measurement process as follows:

Error code t blank display t (error code t blank display)a) t PUSH t blank display

tENTERa)Appears when there are more than one error code.

To rectify the error

1Record down the error code.2Press .3Press ?/1 to turn off the receiver.4Rectify the error.For details, see “Error code and remedies” below.5Turn on the receiver and perform Auto Calibration again (page 22).

Error code and remedies

Error	Explanation	Remedies
code

ERROR 10	The environment Make sure the
	is too noisy.	environment is
		quiet during Auto
		Calibration.

ERROR 11 The speakers are		Place your speakers
	placed too near	further away from
	the optimizer	the optimizer
	microphone.	microphone.

ERROR 12	None of the	Make sure that the
	speakers are	optimizer
	detected.	microphone is
		connected properly
		and perform Auto
		Calibration.

ERROR 20	Front speakers	Check the front
	are not detected	speaker
	or only one front	connection.
	speaker is
	detected.

ERROR 21	Only one	Check the surround
	surround speaker	speaker
	is detected.	connection.

Started Getting

continued

23GB

Contents

Page WARNING For customers in Europe About This Manual The instructions in this manual are for model The HTP-78SSconsists of: • Receiver • DVD player Table of Contents Description and location of parts Front panel About the indicators on the display Rear panel RM-AAU017 D MOVIE Press to select sound fields (MOVIE) MUSIC (MUSIC) O RETURN EXIT O – exit the menu while the satellite tuner or Blu-ray disc player is displayed on 1: Installing speakers Example of front speaker Installing the speakers on the wall You can install your speakers on the wall 2 Fasten the screws to the wall. The screws should protrude 5 to 7 mm 3 Hang the speakers on the screws Example of installing the speakers on the wall 2: Connecting speakers ASpeaker cord (supplied)a) Note on speakers 3:Connecting the audio/ video components Component to be connected AAudio cord (not supplied) If you connect a DVD recorder AOptical digital cord (not supplied) BAudio cord (not supplied) CCoaxial digital cord (supplied) •Do not bend or tie optical digital cords Tips •All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies –turn off or mute the TV’s volume ACoaxial digital cord (supplied) BHDMI cable (not supplied) COptical digital cord (not supplied) Notes on HDMI connections 4: Connecting the antennas 5:Preparing the receiver and the remote 6: Calibrating the automatically appropriate settings Example 2 Set up the optimizer microphone Performing Auto Calibration Press AMP MENU, then press AUTO CAL The measurement process will take a few minutes to complete The table below shows the display when measurement starts After you have finished Error codes To rectify the error Error code and remedies Warning codes To change the settings manually Warning codes and solutions 7:Adjusting the speaker levels and balance To turn off the test tone Selecting a component To mute the sound To avoid damaging your speakers Listening/Watching a component Adjust to a suitable volume Set up the DVD player Refer to “Quick Setup Guide” supplied with the receiver You can also use INPUT SELECTOR on this receiver to select “DVD” Watching a DVD 28GB Navigating through menus To return to the previous display To exit the menu Overview of the menus Menu Parameters Settings 30GB Initial setting 31GB Adjusting the level LEVEL menu parameters Adjusting the tone TONE menu parameters Settings for the surround sound SUR menu parameters Settings for the tuner Settings for the audio TUNER menu parameters AUDIO menu parameters Settings for the system SYSTEM menu parameters xSL DIST. (Surround left speaker distance) xSR DIST. (Surround right speaker distance) Also, the center speaker cannot be set more than For example, setting the center speaker distance xSUR PL Calibrating the appropriate settings automatically Enjoying Dolby Digital and DTS Surround sound Types of A.F.D. mode Selecting a preprogrammed sound field Sound Surround Enjoying 39GB Types of sound field available About DCS (Digital Cinema Sound) About CINEMA STUDIO EX modes To turn off the surround effect for movie/music Listening to FM/AM radio If you cannot tune in a station In case of poor FM stereo reception Presetting radio stations Using the controls on the receiver Displaying RDS information While receiving an RDS station, press DISPLAY repeatedly Description of program types Program type Description Enjoying the DIGITAL MEDIA PORT AVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack Using the Sleep Timer Changing button assignments Categories and the corresponding buttons To clear all remote button assignments Glossary Precautions On safety On power sources On heat buildup On placement On operation If you encounter color irregularity on a nearby TV screen If color irregularity is observed Troubleshooting Audio Video Tuner If you are unable to remedy the problem using the troubleshooting guide Remote commander Error messages If the problem persist Reference sections for clearing the receiver’s memory Specifications • Subwoofer (SS-WP1100) Supplied speakers Supplied accessories Design and specifications are subject to change without notice 57GB Index Page (1) Sony Corporation