Recording

To attach the supplied wide-conversion lens

Attach the wide-conversion lens until it fits firmly.

You can attach the wide-conversion lens both on land and underwater.

Note

This wide-conversion lens is to be used only underwater.

When using the supplied color filter, attach it on top of the wide-conversion lens.

Using the supplied sunshade

The supplied sunshade for the LCD

monitor reduces glare from the LCD monitor. Attach the sunshade as shown

in the illustration.

Attachthesunshadeuntil itfitsfirmly.

You can attach the wide-conversion lens, sunshade, and color filter underwater

If the image on the LCD screen is not clear because of the air remains between these accessories and the marine pack, reattach them underwater.

When the LEAK lamp flashes

If water happen to leak in , the LEAK lamp (yellow) flashes.

LEAK lamp (yellow)

In such a case, remove the marine pack from the water as soon as possible, keeping it horizontal. Be sure to surface following the safety rules for diving.

Dry the marine pack with a soft cloth and then open it.

To switch off the lamp, disconnect the remote control cable. Check the cause of the leak.

If the camcorder is wet, take it to the nearest Sony dealer immediately.

14-EN