On maintenance

After recording in the sea, submerge the marine pack with the buckles tightly fastened in fresh water for a while to remove the sea water. Then rinse it with fresh water and wipe it with a soft cloth.

•Every time you use the marine pack and the video camera recorder underwater, clean the video camera recorder and the inside of the marine pack with a dry soft cloth. Do not use any type of solvent, such as alcohol or benzine for cleaning, as this may damage the finish.

•If water comes between the rear shell and the rubber part, remove the rubber and clean it with a dry soft cloth.

 

EN

When you store the marine pack

F

• Coat the O-ring slightly with the supplied grease, and put it in the groove correctly.

ES

Join the front and rear shells then put in a cool place without fastening the buckles.

 

•Prevent dust from collecting on the O-ring.

•Avoid storing the marine pack in a cold, very hot or humid place, or together with naphthalene or camphor, as these conditions might damage the unit.

On transportation

•When transporting the marine pack, be sure to remove the video camera recorder from the marine pack.

•When transporting the marine pack by air or by car, use a marine pack carrying case (not supplied).

5-EN