Upgrading and Maintaining Components
43
Installing an Internal Hard Disk Drive
Models that have one hard disk drive are equipped with an available bay to hold an additional
The drive you install must not require front panel access. The hard disk drive access light blinks when either internal drive is active.
!Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord.
1Configure the jumpers on the new drive as a slave device (see your new drive’s documentation for configuration instructions).
Power connector
Jumpers
Drive connector
2 Remove the side panel (see “Removing the Side Panel” on page 26).
