Sony MX-E500 specifications Ic Pin Function Description

6-8. IC PIN FUNCTION DESCRIPTION

•IC501 SN761057DBT (RF AMP, FOCUS/TRACKING ERROR AMP)

Pin No.	Pin Name	I/O	Description
1	TE	O	Tracking error signal output to the system controller (IC601)
2	REXT	I	Connect terminal to the external resistor for ADIP amp control
3	WPPLPF	I	Connect terminal to the external capacitor for TPP/WPP low-pass filter
4	VREF	O	Reference voltage output terminal (+1.1V)
5	C	I	Signal (C) input from the optical pickup detector
6	D	I	Signal (D) input from the optical pickup detector
7	D-C	I	Signal (D) input from the optical pickup detector (AC input)
8	IY	I	I-V converted RF signal (IY) input from the optical pickup detector
9	IX	I	I-V converted RF signal (IX) input from the optical pickup detector
10	JX	I	I-V converted RF signal (JX) input from the optical pickup detector
11	JY	I	I-V converted RF signal (JY) input from the optical pickup detector
12	A	I	Signal (A) input from the optical pickup detector
13	A-C	I	Signal (A) input from the optical pickup detector (AC input)
14	B	I	Signal (B) input from the optical pickup detector
15	TON-C	I	Connect terminal to the external capacitor for TON hold
16	CIG	I	Connect terminal to the external capacitor for the low-pass filter of NPP divider
			denominator
17	CDN	I	Connect terminal to the external capacitor for the low-pass filter of CSL divider
			denominator
18	PD-I	I	Light amount monitor input terminal (invert input)
19	PD-NI	I	Light amount monitor input terminal (non-invert input)
20	PD-O	O	Light amount monitor output terminal
21	ADIP	O	ADIP duplex FM signal (66.15kHz ± 3kHz) output to the system controller (IC601)
22	DVDD	I	Power supply terminal (+1.9V) (digital system)
23	SBUS	I/O	SSB serial data input/output with the system controller (IC601)
24	SCK	I	SSB serial clock signal input from the system controller (IC601)
25	XRST	I	Reset signal input from the system controller (IC601) “L”: reset
26	OFTRK	I	Off track signal input from the system controller (IC601)
27	DGND	I	Ground terminal (digital system)
28	BOTM	O	Bottom hold signal output of the light amount signal (RF/ABCD) to the system controller
			(IC 601)
29	PEAK	O	Peak hold signal output of the light amount signal (RF/ABCD) to the system controller
			(IC 601)
30	VREF	I	Connect terminal to the external capacitor for the internal reference voltage
31	VC	O	Middle point voltage (+1.2V) generation output terminal
32	CCSL2	I	Connect terminal to the external capacitor for TPP/WPP low-pass filter (not used in this set)
33	RF OUT	O	Playback EFM RF signal output to the system controller (IC601)
34	AGND	I	Ground terminal (analog system)
35~37	EQ, LP, PS	I	Connect terminal to the external capacitor for the RF equalizer
38	AVCC	I	Power supply terminal (analog system) (+2.2V)
39, 40	OFC2, OFC-1	I	Connect terminal to the external capacitor for RF AC coupling
41	ABCD	O	Light amount signal (ABCD) output to the system controller (IC601)
42	FE	O	Focus error signal output to the system controller (IC601)
43	S-MON	O	Servo signal monitor output to the system controller (IC601)
44	ADIP-IN	I	ADIP duplex FM signal (66.15kHz ± 3kHz) input terminal, 3 times speed

— 31 —