Sony MZ-B100 specifications S e t T m p, A S S Y, C D R U N, C D O K, # # # N G, M O R U N

MZ-B100

[Temperature Correction]

•Adjustment Method of temperature correction

1.Select the manual mode of test mode, and set the mode num- ber 014. (See page 13)

LCD display

S e t T m p

014

2.Measure the ambient temperature.

3.Adjust with [EASY SEARCH +], [EASY SEARCH --] key so that the adjusted value (hexadecimal value) becomes the am-

bient temperature.

(Initial value: 14h = 20 °C, Adjusting range: 80h to 7fh (–128 °C to +127 °C)

4.Press the X key to write the adjusted value.

[Overall Adjustment Mode]

•Adjustment Method of Overall Adjustment Mode

1.Setting the test mode. (See page 12)

2.Press the . or [EASY SEARCH --]key activates the over- all adjustment mode where the LCD display as shown below.

LCD display

A S S Y * *

000

: (DISC MARK) When power adjustment “H” finished; Outward ON

When power adjustment “L” finished; Inward ON

Power supply is not yet adjusted unless both outward and inward disc marks are ON.

Note: Disc mark is displayed on the remote commander LCD only.

** : Left side = MO auto adjustment information F* : Auto adjustment finished

1* : Manual adjustment remains

0 * : Not adjusted yet

Right side = CD auto adjustment information

*F: CD auto adjustment finished

*1: Manual adjustment remains (not auto adjustment)

*0: Not adjusted yet

3.Insert the CD test disc TDYS-1 (Parts No.4-963-646-01) or an available SONY CD disc.

4.Press N key. The system discriminates between CD and MO and performs automatic adjustment for CD.

Also, if . key is pressed, CD is adjusted automatically.

LCD display

C D R U N

%%%

%%%: Manual mode number being executed

•CD Automatic Adjustment item

Mode No.	Description
312
313	CD electrical offset adjustment
314
328	CD TWPP gain adjustment
321	CD tracking error gain adjustment
323	CD tracking error offset adjustment
332
336	CD ABCD level adjustment
344	CD focus gain adjustment
345	CD tracking gain adjustment
521	CD two-axis sensibility adjustment
522
341	CD focus bias adjustment

5.If the result of automatic adjustment is OK, the following dis- play appears in the LCD:

LCD display

C D O K

341

6.If the result of automatic adjustment is NG, the following dis- play appears in the LCD:

LCD display

# # # N G

## # : Overall adjustment. NG mode number

7.If NG, set the manual mode. Perform automatic adjustment for the items not accepted. (See page 13)

8.If CD adjustment is OK, insert an available SONY MO disc (recorded).

At this time, be sure to turn OFF the disc protect switch.

9.Press N key. The system discriminates between CD and MO and performs automatic adjustment for the MO disc.

Also, if > key is pressed, MO is adjusted automatically. However, when CD adjustment is not finished, “SetCD!” is blinking on the LCD and MO adjustment is not executed.

LCD display

M O R U N

%%%

%%%: Manual mode number being executed

22