Note: Follow the disassembly procedure in the numerical order given.
3-2. BOTTOM PANEL ASSY
Note : On installation, adjust the position of both switch (S801) and knob (hold).
S801
3 Remove the battery case lid.
1 Open the battery case lid.
2 claw
knob (hold)
4 Close the battery terminal (plus).
5two screws (M1.4)
5 three screws (M1.4)
A6 Remove the bottom panel assy in the direction of arrow A.
3-3. UPPER PANEL SECTION
3two screws (M1.4)
1 flexible board (CN801)
6upper panel section
3 two screws (M1.4)
4
5 two convex holes for screws
2Slide the lever (open) in the direction of the arrow, and open the upper panel section.
7