Storing the settings for individual discs (Disc Memory)

The recorder is factory set to automatically store settings for each disc. The recorder automatically stores the settings for a disc and retrieves them whenever the disc is inserted.

The following setting can be stored:•Program play•Bookmark•“Custom1” and “Custom2” settings of 6-Band EqualizerYou can check the setting as follows.

Jog dial

1 Remove the disc from the recorder, enter the menu and select “Option” - “Disc Memory”.

2 Turn the jog dial until “On” appears in the display, and then press the dial to enter the selection.

To set the recorder so that disc settings are not stored

Select “Off” in step 2.

Erasing the disc information1 Insert the disc whose information is to be erased and verify its contents.2 Select “1MemoryErase” in step 2.The disc information is erased.

z

When “Disc Memory” is set to “On”, “Disc Memory” appears whenever a disc for which settings have been stored is inserted.

Notes

•Settings for up to 64 discs can be stored. Any settings stored afterwards will replace the settings with the lowest frequency of use among the 64. The numbers of discs that can be stored depend on the numbers of tracks recorded on the discs. More tracks recorded per disc means fewer discs can be stored.

•If you try to erase the disc information of a disc that have never been stored, “NO DISC MEMORY” appears in the display for a few seconds.

On the recorder

5-way control key

MENU

(NENT, FR, FF)

 

1 Remove the disc from the recorder, enter the menu and select “Option” - “Disc Mem”.

2 Press the 5-way control key towards FR or FF until “On” appears in the display, and then press the control key to enter the selection.

Erasing the disc information

1 Insert the disc whose information is to be erased and verify its contents.

2 Select “1MemErase” in step 2.

68