2 Find the track mark by pressing the 5- way control key towards FR slightly.

For example, to erase the third track mark, find the beginning of the third track. “00:00” appears in the display. “MARK” appears in the display for a few seconds.

3 Press T MARK to erase the mark.

“MARK OFF” appears in the display. The track mark is erased and the two tracks are combined.

z

When a track mark is erased when you combine two tracks, the recording date and title of the second track changes to those of the first track.

Note

When you erase a track mark between the two consecutive tracks that are assigned into different groups, the second track is re-assigned into the group containing the first track. In addition, if you combine a track that is assigned to a group with a track that is not assigned to a group (two consecutive tracks), the second track takes the same registration setting as the first track.

Formatting the disc (Format)

When using a disc in Hi-MD mode, you can use the Format function to restore a disc to the condition it was in at the time of purchase.

You can use this function only when using a disc in Hi-MD mode.
DiscAfter disc formatting
type

 

 

 

1GB“NO TRACK” appears.

Hi-MD

All data including non-audio

disc

data will be erased.

 

 

 

NOTE: Transfer authorization

 

of the transferred tracks can be

 

restored by inserting the disc

 

into the recorder and

 

connecting the recorder to the

 

computer.

 

 

60/74/80-“BLANKDISC” appears.

minute

All data including non-audio

standarddata will be erased. You can

disc

then use the disc again in either

 

MD mode or Hi-MD mode.

 

 

 

NOTE: Transfer authorization

 

of the transferred tracks will

 

decrease by one.

 

 

Notes

•By formatting a disc, all data (including non- audio data) will be erased. If you think a disc contains such data, insert the disc into the recorder and connect the recorder to the computer to check the contents of the disc.

•If you format a disc, the transferred tracks on the disc will also be erased and the number of transfer authorizations for those tracks will be decreased by one. To prevent the reduction in transfer authorizations, restore the transfer authorization by transferring the tracks to the computer again before formatting the disc.

•The operation mode set in the “Disc Mode” menu is applied to a blank 60/74/80-minute standard disc used on the recorder even if a different operation mode was selected in the SonicStage software or a different operation mode appeared on the display after the disc was formatted by the SonicStage software.

64