Sony MZ-NH1 lever, Functions, DISPLAY •, BACKLIGHT, SOUND SET, SOUND SET, Press x or, Operation1), • BACKLIGHT, Re-labeling, Slide the jog, Press DISPLAY, Press SOUND •

The buttons and control used for character input and their functions are listed below.

Functions	Operation1)
To move the cursor to the	Slide the jog lever
left or right in the letter	(., >).
input area.
To select a letter in the	Turn the jog dial.
letter input area.
To enter a letter.	Press the jog dial
	or the jog lever
	(NX • ENTER).
To enter a title.	Press the jog dial
	or the jog lever
	for 2 seconds or
	more (NX •
	ENTER).
To switch between capital	Press P-MODE •
letters, small letters, and	REPEAT.
numbers/marks.
To insert a blank space.	Press VOL +.
To delete a letter.	Press VOL –.
To cancel labeling.	Press x for 2
	seconds or more.
To move the cursor to	Slide the jog
the right or left in the	lever (.,
character palette.	>).
To move the cursor up	Turn the jog dial.
and down in the
character palette.
To move the cursor from	Press DISPLAY
the letter input area to	• BACKLIGHT.
the character palette.
To move the cursor from	Press x or
the character palette to	DISPLAY •
the letter input area.	BACKLIGHT.
To display “_ (space)”,	Press SOUND •
“:”, “/”, or “–” at the	SOUND SET.
input position in the
letter input area.
To switch between capital	Press SOUND •
letters and small letters.	SOUND SET.

1)Functions of the buttons or the controls may differ depending on when the cursor is in the letter input area or in the character palette.

5 Repeat step 3 and 4 enter all characters of the label title.6 Press the jog dial for 2 seconds or more.

Note

When the recording is stopped or the recording moves on to the next track while labeling titles during recording, the input at that point is entered automatically.

Re-labeling

You can change the track name, artist name, album name, group name, or disc name by doing the procedure for “Labeling” (page 55).

To re-label a track name, artist name, or album name:

Start playing the track you want to re- label, and then change the track name, artist name, or album name while the recorder is playing, or while the recorder is stopped and the track to be re-labeled is currently selected.

To re-label a disc:You can re-label the disc while the recorder is stopped, recording, or playing.

Notes

•The recorder is able to display, but cannot label using Japanese “Katakana” characters.

•The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device (in MD mode only).

56