Sony MZ-NH1 Combining tracks (Combine), To add track marks while recording (except while synchro-recording)

2 Press the 5-way control key towards FR or FF (turn the jog dial on the remote control) to adjust the point to divide.

Pressing the control key (turning the jog dial) moves the dividing point forward or backwards. The dividing point can be moved up to a maximum of 8 seconds forward or backwards from the point T MARK was pressed in step 1.

The point
T MARK is	The dividing point shifts a
pressed in	maximum of 8 seconds
step 1.	forward or backwards.

The moved four-second interval plays back repeatedly.

3 Press the 5-way control key (jog dial on the remote control) to enter the dividing point.

z

You can use the Speed Control function during the Divide Rehearsal function. This allows you to reduce the playback speed (page 51) to carry out the division more accurately.

To add track marks while recording (except while synchro-recording)

Press T MARK on the recorder at the point you want to add a track mark. You can use Time Mark to add track marks automatically at specified intervals (except while digital recording) (page 39).

Combining tracks (Combine)

When you record with analog (line) input, unnecessary track marks may be recorded where recording level is low. You can erase a track mark to combine the tracks before and after the track mark.

The track numbers will change as follows. This operation can be done on the recorder only.

Notes

•You cannot erase a track mark on a track that has been transferred from your computer.

•You cannot erase a track mark on a track that has been recorded in Hi-MD mode using the MD Simple Burner software.

•You cannot combine tracks recorded in different recording mode.

1 2 3 4

Erase a track mark

123

Track numbers decrease

X

5-way control key	T MARK
(FR)

1 While playing the track with the track mark you want to erase, press X to pause.

continued

63