Information, Network RS50 RS506 | JVC DLA-RS60, DLA-RS40, DLA-RS50

ENGLISH

Adjustments and settings in the menu (continued)


	Off		Power is not turned off.
	1	Hour	Power is turned off automatically after 1 hour.
	2	Hours	Power is turned off automatically after 2 hours.
	2	Hours	Power is turned off automatically after 2 hours.
	3	Hours	Power is turned off automatically after 3 hours.
	4	Hours	Power is turned off automatically after 4 hours.

	High Altitude Mode		Set to use at low pressure locations (900m above sea level).
			Settings: On, Off	[Off]
			Settings: On, Off	[Off]
		On	Set.
		Off	Do not set.
		Off	Do not set.
	Communication		Sets the used control terminal. It is not possible to use it at the same time.
	Terminal RS50 RS506		Settings: RS-232C, LAN	[RS-232C]
		RS-232C	Sets the RS-232C terminal.
		LAN	Sets the LAN terminal.
		LAN	Sets the LAN terminal.
	Network RS50 RS506		It is displayed, if the setting of the "Communication terminal” to the submenu "[5-1]
			Network" is set to "LAN".
	Lamp Reset		Reset of the lamp use time to "0".

[5-1] Network RS50 RS506

	DHCP Client		Sets the DHCP client.
	DHCP Client		Sets the DHCP client.
			Settings: On, Off	[Off]
			Settings: On, Off	[Off]
		On	Obtains automatically an IP address from within the connected network's DHCP server.
			* The automatic retrieval starts with the "Set" within the menu.
		Off	The network settings are being done manually.
	IP Address		Sets the IP address.	[192.168.0.2]
	Subnet Mask		Sets the subnet mask.	[255.255.255.0]
	Default Gateway		Sets the default gateway.	[192.168.0.254]
	MAC Address		Displays the MAC address of the unit.
	Set		[5-1] Reflects the network setting.
	Set		[5-1] Reflects the network setting.

[6] Information

Displays upon HDMI/COMP. input

Input	Displays video image input terminal.
Source	Displays the name of the input source.
Deep Color	Displays the color bit depth concerning an input video image signal.
	* When you input YCbCr (4:2:2), it is not displayed.
	* When there is information about DeepColor from the source device, it is displayed.
Lamp Time	Displays the lamp use time.
Displays upon PC input
Input	Displays video image input terminal.
Resolution	Displays image resolution.
H Frequency	Displays the H Frequency.
V Frequency	Displays V Frequency.
Deep Color	Displays the color bit depth concerning an input video image signal.
	* When you input YCbCr (4:2:2), it is not displayed.
	* When there is information about DeepColor from the source device, it is displayed.
Lamp Time	Displays the lamp use time.

Operation

55

Image 55

JVC DLA-RS60, DLA-RS40, DLA-RS50 manual Information, Network RS50 RS506

Contents

PC010680499-1 RS50/DLA-RS60Victor Company of Japan, Limited Instrucción para el cliente Machine Noise Information Germany only Safety PrecautionsAbout the installation place Getting started This plug will fit only into a grounded power Power source indicated on the label. If you areNot sure of the type of power supply to your Power company Do not allow any unqualified person to install the unit Do not cut off the main plug from this equipment Power Connection United Kingdom onlyPower cord Important Europe only Pile Battery ProductsBatterie Produkte Prodotti Baterías/pilasProductos Batteria Tuotteet BatteriProdukter Akku Produkty БатареяИзделия Baterie THX Certification THX Certification RS50 RS506 For detail information about ISF, please refer web site Contents Please check with your authorized dealer for details Accessories/Optional AccessoriesCheck the Accessories Optional Accessories Main body Front Controls and featuresMain body Bottom Left button Down button ⑪ Light receiving section Remote control rear⑫ Power input terminal Main body Rear Duringcooldown About1minute Main body About the indicator displayStand by BlinkingRed Duringstandby Frequency Countermeasures Lighting/flashing lights Blinking Content ConfirmationMain body Warning display and confirmation/response Action Main body Input terminal Remote Control How to insert batteries into the remote control Preparation About installationImportant points concerning the installation How to adjust the vertical angle Up/Down position Installing the Projector and ScreenLens shift correlation chart Left/Right position Fixation of the projector Precautions for MountingBottom Surface Screen Size and Projection Distance Effective Range of Remote Control UnitWhen directing the remote control toward this unit When reflecting off a screen About the connection Types of possible input signals PC compatibleDesignation Camcorder Connection to the unitBD/DVD Recorder BD/DVD Player VCR BD/DVD recorder Connecting via Hdmi CableConnecting via HDMI-DVI Conversion Cable This unit Connecting via RGB Video Cable Connecting via Component Video Cable This unit Connecting via PC Cable RS50 RS506Connected by a 3D Synchro terminal 3D synchro emitter Terminal Connecting via Trigger CableConnected by RS-232C connection cable Sold separatelyTrigger input terminal Φ Network Server Connected by LAN terminal RS50 RS506Connected by a Remote terminal Connection cable sold separately Be carful to avoid fire and electric shocks Connection of the power cord provided Basic Operation Basic operation procedures Turn off power source Adjust the shift image positionAbout Cool Down mode Input Image and Projected Image by Different Screen Size Frequently used useful functionsInput Image Screen Size 169 Zoom Mask the image Project the imageTo end ① Selec ② Confirm You can hide the image temporarilyUp and down Organization of the picture Organization of the input Adjustments and settings in the menuWhen there is a PC signal input, Aspect PC is displayed Structure of the menu hierarchy summary Adjustments and settings in the menu From the previous For PC signal input Custom Gamma AdvancedColor Management Comp Hdmi Lens Control Pixel AdjustNetwork Displaying the main menu Menu operation buttonMenu operation buttons Menu is displayed Press cursor / to select a submenu Menu operation procedureRepeat steps 6-2 to adjust other items Press Menu Color Profile Picture AdjustPicture Mode Menu item description Dark/Bright Level This is the default value according to the picture modeColor Temp To 1-1 Color Temp. of the submenu Gamma Offset Color Temp Advanced Custom 1~3 SharpnessCustom Gamma Detail Enhance Aspect Video Input SignalColor Management RS50 RS506 Picture Position 235 Hdmi255 COMP. RS50 RS506 Installation Lens Control Pixel AdjustLock Function Display Setup Network RS50 RS506 Information Gamma Curve Operation guide glossary100% Original Description of the 3D methodEye Left-eye image Right-eye image Stereoscopic video image Left- eye image CloseEye 3D-glasses Replacing the Lamp Lamp replacement procedure After Replacing the Lamp Install the new lamp unitUnit Attach the lamp cover SelectFunction Lamp Reset Resetting lamp TimeRe-confirm Red Lights Reset the lamp time by remote control If the filter is damaged or too dirty to be cleaned Method for cleaning and replacing filtersClean the filter Reinstall the inner filter Power is not supplied Troubleshooting Is the lamp near exhaustion? OthersReference page 60 to No device is connected to the input terminal Input terminal is connected but there is no signalInput the video signals Input video signals that can be used RS-232C Interface RS-232C SpecificationsTCP/IP-connection Unit ID Command FormatCommand and data Binary code Binary code Command Type Data descriptionRemote control code End This section shows the communication examples of RS-232C Type Command DescriptionReference command Operating command About Trademarks and Copyright Specifications Others Unit mm Dimensions Index Lens Remote controlMessage Lamp Memo