JVC DLA-RS50 Lens Control, Lock, Pixel Adjust, Adjustments and settings in the menu continued

ENGLISH

Adjustments and settings in the menu (continued)

Anamorphic		The video images are projected after being enlarged in the vertical direction of the panel
		resolution. This setting is used when one uses the anamorphic lens to enlarge them in the
		horizontal direction.
		(*) Anamorphic mode cannot be set when there is a 3D signal input.
		If a 3D signal is fed in when Anamorphic mode is set to A or B, Anamorphic mode is
		automatically turned Off.
		Settings: A, B, Off	[Off]
	A	Video with an aspect ratio of 2.35:1 is enlarged in the vertical direction of the panel
		resolution and then projected.
	B	Video with an aspect ratio of 16:9 are displayed by reducing them in the horizontal
		direction, without changing their size in the vertical direction.
	Off	Used when watching video images other than those with a 2.35:1 aspect ratio while using
		an anamorphic lens. 2.35:1 video images are projected without any changes. (Black
		bands appear on all sides)
Screen Adjust		It corrects the white balance fault according to the reflective properties of the projection
		screen. Please adjust to your preference.
Black Level		Sets the black level when used indoors.
		Settings: 0 to 10	[0]

[3-1] Lens Control

		It controls each motorized functions of the lens during the projector-installation.
Focus		This function is used to adjust the focus.
Zoom		This function is used to adjust the zoom.
Shift		This function is used to adjust the shift.
Lens Cover		This function is used to set if the lens cover should be linked with a power supply for
		opening/closing, or if it should be left open.
		Settings: Auto, Open	[Auto]
	Auto	This opens/closes the lens cover when it is linked to on/off of a power supply.
	Open	Regardless if the power supply is on on/off, the lens cover is always open.
Image Pattern		It is possible to adjust the projection screen during adjustment of the focus zoom shift.
		Settings: On, Off	[On]
	On	During the adjustment, the image pattern is displayed.
		The image pattern is displayed in conjunction with the above setting items.
	Off	The external input signal is displayed without displaying the image pattern.
Lock		This sets the lens control to on/off.
		Settings: On, Off	[Off]
	On	It is not possible to adjust the above setting items. If the remote control button "LENS"
		button is pressed, a warning message is issued.
	Off	This functions as lens control function.

[3-2] Pixel Adjust

This fine tunes each slight color errors in the horizontal/vertical directions of the video images in units of 1 pixel.

(*)It is impossible to match all image pixels on the screen. Due to the equipment, there will always be some gaps.

(*)In case the image is reversed, or upside-down, the horizontal and vertical directions are reversed.

(*)Please perform adjustments on a clear still picture.

(*)For fine tuning, the effects of adjustments may be difficult to understand for some video images.

Operation

53