JVC DLA-RS60, DLA-RS40, DLA-RS50 manual Installation, COMP. RS50 RS506, 2-3 PC, Operation

3 Operation

Adjustments and settings in the menu (continued)

3D Format		Sets the format of the 3D input signal.
		Some signals may not be appended with 3D information themselves, and projection may
		fail if they are recognized as normal 2D signals.
		When this occurs, configure the settings manually.
		(*) It is recommended to read "On 3D" (reference page: 53) before watching 3D video
		images.
		Settings: Auto, Frame Packing, Side by Side, Top & Bottom, 2D	[Auto]
	Auto	Is set automatically.
	Frame Packing	Select this if the 3D input signal is the frame pack method.
	Side by Side	Select this if the 3D input signal is the side by side method.
	Top and Bottom	Select this if the 3D input signal is the top and down method.
	2D	Projected as a 2D signal.

[2-2] COMP. RS50 RS506

(*) It can be set when the COMP. terminal is selected.

Color Space		It configures the input signal method of the component input terminal.
		Settings: Y Pb/Cb Pr/Cr, RGB	[Y Pb/Cb Pr/Cr]
	Y Pb/Cb Pr/Cr	It is set for the component video image input signal.
	RGB	It is set for the RGB video image input signal.

[2-3] PC

		(*) Setting can be done when selecting a PC terminal.
Auto Alignment		The picture position of Tracking and Phase are automatically adjusted.
Tracking		Adjusts the size and display of the horizontal direction and display area of the video
		images.
		(Depending on the signal, there is normally no need to be adjusted.)
Phase		Adjusts the flickering and blur of the video images.
		(Depending on the signal, there is normally no need to adjustment.)
Picture Position		Adjust the display of the picture position.
	Horiz.	Adjusts the horiz. of the video image.
	Vert.	Adjusts the vertical position of the image.

[3] Installation

Lens Control		To Sub-menu"[3-1] Lens Control"
Pixel Adjust		To submenu "[3-2] Pixel Adjust"
Installation Style		Matching the state of the projector’s projection, one can switch horizontal and vertical flip
		/ forward switch.
		Settings: Front, Ceiling Mount (Front), Rear, Ceiling Mount (RE)	[Front]
	Front	Front upright projection mode.
	Ceiling Mount (F)	Ceiling/front projection mode.
	Rear	Rear upright projection mode.
	Ceiling Mount (R)	Ceiling/ rear projection mode.
Keystone		In regards to the projection plane, any occurring keystone distortion is adjusted in case
		the installation location is inclined.
		(*) There may be instances, when the video image - after having corrected keystone
		distortion - will not match the screen. The position with a shift correction of 0% position is
		an exception.
		(*) When there is a 3D input signal, adjustment is not possible.
	Horizontal	Adjusts the horizontal keystone.
		Settings: -40 to 40	[0]
	Vertical	Adjusts the vertical keystone.
		Settings: -30 to 30	[0]

52