ENGLISH 
Adjustments and settings in the menu (continued)
|
|
|
|
|
|
| Mask | It hides the upper, lower, left and right borders of the screen with a black mask. Can be | |||
|
|
|
| individually adjusted vertically and horizontally. Please adjust to your preference. |
|
|
|
|
| Setting: Off, 2.5%, 5%, Custom | [Off] |
|
|
|
| ||
|
| Off | Not masked. |
| |
|
| 2.5% | Compared to the original video images, around 2.5% around the video images are |
| |
|
|
|
| masked. |
|
|
| 5% | Compared to the original video images, around 5% around the video images are masked. | ||
|
| Custom |
|
| |
|
|
|
| ||
|
|
|
|
|
|
|
|
| Left | Compared to the original video images, around 5% of the video images are masked on | |
|
|
|
| the left side. |
|
|
|
|
| Settings: 0 ~ 5% | [0] |
|
|
| Right | Compared to the original video images, around 5% of the video images is masked on the | |
|
|
|
| right side. |
|
|
|
|
| Settings: 0 ~ 5% | [0] |
|
|
| Top | Compared to the original video images, around 5% of the video images are masked at the | |
|
|
|
| upper side. |
|
|
|
|
| Settings: 0 ~ 5% | [0] |
|
|
| Bottom | Compared to the original video images, around 5% of the video images are masked at the | |
|
|
|
| bottom side. |
|
|
|
|
| Settings: 0 ~ 5% | [0] |
|
|
|
| ||
| Progressive | Interlaced signals (480i/576i/1080i) are converted to progressive signals. Interpolates | |||
|
|
|
| interlaced signal video images with video images from the surrounding. Please set to your | |
|
|
|
| preference. |
|
|
|
|
| Settings: Auto, Off | [Auto] |
|
| Auto | It is automatically detected if the 24p video images, which can be seen in the film screens, | ||
|
|
|
| interlaced signals from the original video material or if they are the product of signal |
|
|
|
|
| conversion and are interpolated accordingly. |
|
|
| Off | The interpolation of video images as interlaced video signals, e.g. video material is done. | ||
|
| ||||
[2-1] HDMI
Input | (*) It can be set when the HDMI terminal is selected. |
| |
|
|
|
|
|
| Sets the dynamic range of the input video images (scale). Dark and bright areas, which | |
|
| are not matched to the range, might get brighter or darker. If you are unsure of the input | |
|
| signal dynamic range, please check under "Level Check". |
|
|
| Settings: Standard, Enhance, Super White | [Standard] |
| Standard | It gets set if the dynamic image range of the gradation level of the input image is set to | |
|
|
| |
| Enhanced | It is set if the dynamic range of the input video scale level is | |
|
| please set them here. |
|
| Super White | It is set if the dynamic range of the input video scale level is | |
|
| to video equipment compatible with Super White for Super | |
Level Check |
| You can confirm the dynamic range of the input signal.A pattern as shown in the | |
0 | 235 | illustration is displayed in the four corners and center of the screen. Please compare the | |
dynamic range of input signal with this pattern illustration and confirm. | |||
|
| ||
255 | 16 | (*) The number in the illustration is the scale level. This number is not displayed. The | |
|
| illustration of the gradation in the figure is accentuated for explanatory purposes It is | |
|
| different from the actual scale level. |
| Color Space | It sets the color space of the input signal. |
| |
|
|
| Settings: Auto, YCbCr(4:4:4), YCbCr(4:2:2), RGB | [Auto] |
|
|
| ||
|
| Auto | YCbCr(4:4:4), YCbCr(4:2:2), RGB signals are automatically detected and configured. | |
|
| YCbCr (4:4:4) | Sets it if the input of the YCbCr(4:4:4) input video image signal is performed. |
|
|
| YCbCr (4:2:2) | Sets it if the input of the YCbCr(4:2:2) input video image signal is performed. |
|
|
| RGB | It is set when the RGB video signals input is performed. |
|
|
|
| ||
| Control with HDMI | Configured communication of the HDMI equipment control |
| |
|
|
| Settings: On, Off | [Off] |
Operation
51
