JVC DLA-RS60, DLA-RS40, DLA-RS50 How to insert batteries into the remote control, Remote Control

ENGLISH

Controls and features (continued)

■Remote Control

To turn off the power

To set the screen size (Reference page: 34)

Anamorphic

To control lens (Reference page: 32)

To hide the image temporarily(Reference page: 36)

To display/close the menu (Reference page: 43)

RS50 RS506

STAND BY		ON	To turn on the power
	INPUT
HDMI 1	HDMI 2	COMP.	To select input mode
			(Reference page: 32)
ASPECT	ANAMO	PC	RS450 INFO. Button: displays information
			Lens Aperture
CONTROL	LENS AP.	C.M.D	Clear Motion Drive
LENS.
HIDE		LIGHT	To illuminate buttons on the remote
			control for 7 second
			To select or confirm
MENU		BACK	To return to the previous menu
PICTURE MODE			(Reference page: 43)
FILM	CINEMA	ANIME

Getting Started

	NATURAL	STAGE		3D	To switch picture mode
	USER1	USER2		THX	RS450 USER3 Button
To adjust color temperature	GAMMA	TEMP	P.FILE	ADJ.	Color Profile
To set gamma					RS450 SPACE Color space button
		COLOR	COLOR	PIC.	COLOR
					Sequentially switched picture
					adjust items, such as contrast and
					brightness.The switching items are
					not the same for different models, or
					different picture modes.
How to insert batteries into the remote control
①	②				③

●If the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out.

When this happens, replace the batteries. Insert the batteries according to the marks.

●Be sure to insert the end first.

●If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and operate the remote control.

19