JVC DLA-RS40 Replacing the Lamp, Lamp replacement procedure, Remove the power plug from the, Memo

4 Maintenance

Replacing the Lamp

The lamp is a consumable item. If the image is dark or the lamp is turned off, replace the lamp unit.

●When the lamp replacement time approaches, a message is displayed on the screen and the condition is indicated by the indicator. (Reference page: 16 to 17, 67)

CAUTION

●	Do not insert your hands into	Lamp replacement procedure
	the opening of the lamp!
	This could cause obvious	1	Remove the power plug from the
	equipment’s function, wounds
	deterioration of the
	and electric shocks.		outlet
● Do not replace the lamp		2	Remove the lamp cover
	immediately after the unit has
	been used, and allow a cooling		● Remove the screws with a	screwdriver.
	period of 1 hour or more before
	replacement. The temperature
	of the lamp is still high and this
	may cause a burn.

●Do not apply shock to the lamp unit. It may cause lamp blowout.

● Do not use flammable air duster
to clean the internal parts of the
unit. This may cause fire.	3 Loosen the screws on the lamp unit
MEMO
Usable Lamp Life	● Loosen the screws with a screwdriver.

●When using the “Lamp Power” set at “Normal", the lifetime of the lamp will be approximately

3000 hours.

This is an average lifetime and cannot be guaranteed.

● The lamp life may not reach
3000 hours depending on the
operating conditions.
● When the lamp has reached
the end of its usable life,
deterioration progresses
rapidly.	4 Pull out the lamp unit
● If the picture becomes dark,
the tint becomes strange, or	● Grasp the handle and pull out the lamp unit.
the image flickers, promptly the

lamp unit for a new one.

Purchasing the Lamp Unit

Please consult your authorized dealer.

■Lamp Unit

Part No.: PK-L2210U

Handle

60