ENGLISH 
5 Adjust the shift (image position)
LENS
Lens Control
Shift
Select Back
Operate 
BACK
Adjust accordingly
by pressing the up/down buttons
MEMO
About Cool Down mode
● The Cool Down mode is a |
function to cool down the lamp |
●After adjusting the image position, it may be necessary to select “Pixel Adjust” from the Settings menu “Installation”.
(Reference page:53)
● Every time the LENS
button is pressed, the adjustment
item will be switched among “Focus”, “Zoom” and “Shift”.
OK It can also be switched with the button.
for approximately 60 seconds |
after projection is complete. |
This function prevents the |
internal parts of the unit from |
deformation or damage due to |
overheating of the lamp. It also |
prevents lamp blowout and |
premature shortening of lamp |
LENS
)RFXV 
=RRP 
6KLIW
life. |
● During Cool Down mode, the |
6 Turn off power source
STAND BY
While a confirmation screen is displayed
STAND BY
STAND BY/ON
Blinking (Red Lamp)
Cool Down mode
STAND BY/ON
Light on (Red Lamp)
●When power off, the lens cover will be closed.
●The power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time.
●You can also press the 
button on the unit to turn off the power. (Reference page: 15)
●Pull out the power plug when the unit will not be used for a prolonged time.
[STANDBY/ON] indicator blinks |
in red. |
● After the Cool Down mode is |
complete, the unit automatically |
returns to standby mode. |
● Do not pull out the power plug |
during Cool Down mode. This |
may shorten the lamp life and |
cause a malfunction. |
Operation
33
